For anyone who works at heights, safety must be a priority. Falling from one level to another can result in injury or death. As a result of recent fatalities, significant fines, and even jail time for those who neglected the safety of their workers, adequate fall protection systems are necessary. When workers fall, a fall protection system is designed to catch them, minimizing the risk of injury or death. Using the Hierarchy of Control, we understand preferred methods for identifying and dealing with hazards. Managing hazards is a high priority in the hierarchy. The main objective of working at heights is to reduce physical risk. Working through the hierarchy and utilizing each step is vital if this cannot be achieved. Taking a closer look at the above hierarchy of control, let’s examine personal protective equipment. Personal Protective Equipment (PPE) is the last resort in the control hierarchy because it exposes the worker to the greatest risk.

PPE for Working at Heights can be implemented in two (2) main ways:

  • Fall restraint system
  • System for Fall Arrest

Fall arrest systems are very comparable to fall restraint systems. In addition to falling, workers are also at risk of falling over the edge. As a result of this risk, the system must include absorption units such as shock packs or self-retracting lifelines (SRLs). In order to reduce the loads transferred to the body during a fall, these units are designed to reduce the energy released during a fall. Using restraining rope lines, a Fall Restraint System prevents workers from accessing the edge of a roof or structure. This one poses the least risk to the work among the two methods. While this method reduces the risk of falling over the cliff, there is still a risk of a person falling through a roof as the roof may be damaged. Visit to know more.


When should fall protection equipment be inspected?

All fall protection equipment must undergo regular safety inspections. At least every six months, harness gear, equipment, ropes, and webbing elements should be inspected. Anchor points, static lines, and rail systems are inspected. Refer to the guidelines provided by the manufacturer. The inspection requirements will be outlined there. The frequency of inspections will need to be increased if you use fall arrest equipment in a corrosive environment.


We offer a comprehensive range of fall prevention systems and protective equipment here at No1 Roofing and Building Supplies. We can also provide expert height safety advice to ensure compliance with all height safety legislation. Reach out to our team to figure out how you can keep your staff safe by offering some of the best height safety equipment.

Previous Post
Next Post

Leave a Reply

Your email address will not be published. Required fields are marked *