A Quick List of Boring Equipment You May Need for a Project

There are over 23 million American households relying on water from private wells. These wells are created through a process called boring, which involves drilling holes into the ground to access water.

This is just one of the many purposes of boring holes. Other purposes include extracting gases and other liquids like petroleum. Boring is even helpful for pulling up samples for scientific analysis.

If you are going to bore a hole, you need specialized boring equipment to do it. Keep reading to learn about all the equipment you need to get started on a boring job.

What is Boring in Construction?

Drilling uses a drill and drill bit to create a hole. Boring is a secondary process that happens after drilling.

There are two types of boring, each one with a different secondary purpose which adds to the hole that was drilled. Roughing is a type of boring that enlarges the hole, whereas finishing improves the surface finish or external accuracy of the hole. 

Equipment You Need for Boring

There are several pieces of equipment and tools used for boring. The specifics of the tools needed will change depending on the boring job, but the basics are always the same.

Boring Machine

This is arguably the most important piece of equipment in boring since you won’t be able to do the job without it. There are three different types of boring machines.

Horizontal boring machines bore holes in a parallel direction to the surface. Vertical boring machines bore in a perpendicular direction to the surface and can move up and down. Line-boring machines have boring bars which are supported at both ends.

Boring Bars

These are fitted to the boring machine. There are two types of boring bars, those being solid boring bars and damping bars.

Solid boring bars are used in both roughing and finishing. Roughing uses solid boring bars made of heavy metals while finishing uses bars made of carbide. Both types of solid boring bars are dense to withstand the pressure exerted on them. 

Damping bars are helpful when you run into problems. They are similar to solid boring bars but can stabilize any chatter you’re picking up in the material surrounding the boring site. 

Underground Locators

This is a helpful boring tool. A locator is a device that gives you underground awareness. This means it can scan the ground below to identify any hazards.

Hazards mean your bored holes could collapse or your equipment could get damaged. Locators help you avoid these outcomes, and save you time and money in the process. 

If you want to make your boring job easier, it’s time to shop for a Subsite locator

Get Started With The Right Boring Equipment

Now that you know what boring equipment you need, you’re all set to start your first boring job. Having the right equipment is vital for ensuring you do the job right. 

If you enjoyed this article, please check out our blog for more content!

Previous Post
Next Post

Leave a Reply

Your email address will not be published. Required fields are marked *